You need to have javascript enabled in order to access this site.

For most applications reduced port ball valves are specified because they are less expensive versus the full port or full bore valves such as dual wafer check valve. Full bore valves are utilized in pipelines that are that are often be subject to pigging operations and need the bore in the ball valve to complement the internal diameter in the pipeline. Full bore valves are specified in hot-tapping applications and where pressure drop along the valve becomes very critical.

In a trunnion ball design the ball is supported below the ball. Class 150 and 300 rated valves 8" and above tend to be specified with trunnion mounted ball design. Class 600 and above rated valves as a rule have trunnion mounted design in sizes 1 1/2" and above.

The Benefits of Ball Valves
Easy to ascertain if it is open or closed. When the handle is within line together with the pipe it is possible to tell the valve is open; when the handle is perpendicular on the pipe the valve is closed. This is really a great visual indication of whether there may be flow throughout the valve or otherwise not.

Operation after a period of disuse is not hard. The toughness for ball valves enables them to work and completely turned off flow after a period of disuse. This provides extra satisfaction.

Quick disconnect. The motion that's needed to operate a ? turn the valve is quick and minimal when compared with gate valves. Water hammer is really a possibility when the flow with the valve is sufficiently strong enough to vibrate the queue when it comes to a rapid stop since the valve is quickly disconnect.

Ball Valve Seat Design: Ball valves are generally provided with soft seats for example PTFE, filled PTFE, Nylon, Buna-N, Neoprene which limits the utmost working temperature and definitely makes the valve unsuitable for abrasive service. For abrasive service applications or high integrity applications metal to metal seated ball valves can be utilized as described below.

With a compact ball and small port, the normal port ball valve is frequently cheaper than other kinds of valves. This can be a great option and doesn’t restrict flow excessive. Flow is bound somewhat, and for that reason doesn’t fit all applications.

Standard port ball valves are commonplace and utilised in almost every industry that will require the use of ball valves. They are sometimes used as being a one-size-fits-all valve. However, since there is certainly a reduction in flow, it may be worn out by overuse.